Learn tips to help workers stay safe by avoiding exposure to carbon monoxide.

two men looking up at pipes

The risk of carbon monoxide (CO) exposure escalates during cold winter months when doors, windows and other sources of natural ventilation may be closed.

Large amounts of CO can overcome a worker in minutes, causing a loss of consciousness and suffocation. Or even death. Even if the employee recovers, acute poisoning may result in permanent damage.

Common sources of CO poisoning

One of the most common sources of industrial CO poisoning is the fuel-driven forklift. The risk of CO poisoning is especially high when gas- or propane-powered forklifts are used inside enclosed spaces.

Even with ventilation, the situation can still be hazardous, since poisoning can occur even at low CO concentrations.

Other sources of CO in the workplace include:

  • Cars or trucks left idling in enclosed spaces, such as a garage
  • Portable fuel-burning power tools, such as concrete saws and chainsaws used in confined or poorly ventilated spaces
  • Generators used indoors
  • Poorly vented or malfunctioning heaters and furnaces
  • Power washers, insulation blowers, and compressors used in enclosed areas

Monitoring and avoiding CO in your facility

There are a number of proactive measures you can take to help protect your workforce from this debilitating problem:

  • Identify potential sources of CO exposure and monitor employee exposure
  • Make sure ventilation systems are working properly to remove CO
  • Maintain CO-producing equipment in good working condition
  • Consider switching from gasoline-powered equipment to equipment powered by electricity, batteries, or compressed air for situations where there is a high risk of CO poisoning
  • Prohibit the use of fuel-powered engines or tools in poorly ventilated areas
  • Install CO monitors with audible alarms in areas where CO might be formed
  • Test air regularly in areas where CO may be present, especially confined spaces

Preventing CO poisoning

Require employees to wear a full face piece, pressure-demand, self-contained breathing apparatus (SCBA) or a combination full face piece, pressure-demand, supplied-air respirator with auxiliary self-contained air supply in areas with high CO concentrations; have them use respirators with appropriate canisters for short periods under certain circumstances where CO levels are not exceedingly high.

  • Provide training to educate workers about sources and conditions that may result in CO poisoning, preventive measures, symptoms of exposures and first aid for CO poisoning.
  • Instruct employees to report ventilation or other problems that could result in CO exposure.
BullHorn-outlinemegaphone
Subscribe to our newsletter for timely content in your inbox